Brands we represent

Cancoil refrigeration equipment and finned coils for Eastern Canada

KCL represents Cancoil Thermal Corporation across Eastern Canada, supplying commercial refrigeration equipment and ARI-certified finned coils for food processing, refrigerated warehouses, supermarkets, and convenience stores.

Request a Cancoil quote

One of North America’s fastest-growing refrigeration manufacturers

Cancoil Thermal Corporation designs and manufactures commercial refrigeration equipment and finned tube coils used in food processing, refrigerated warehouses, supermarkets, convenience stores, schools, hospitals, restaurants, and computer rooms.

Founded in 1983 in Kingston, Ontario, Cancoil has expanded its manufacturing footprint five times and now operates two facilities totaling over 200,000 square feet. A sustained focus on R&D and custom engineering has earned several of its innovations patent recognition, and its coils are designed and manufactured to UL and CSA listed standards.

Cancoil Refrigeration Equipment

Unit coolers

For spaces from -20 to 34 degrees F, with air defrost, electric defrost, hot gas defrost, and glycol product cooler configurations for reach-in and walk-in applications.

Condensing units

Air-cooled, water-cooled, and remote condenser configurations from small walk-in coolers through full warehouse refrigeration, matched with Cancoil unit coolers or third-party air handlers.

Air cooled condensers

Large face areas and generous airflow optimized for environmentally friendly refrigerants, with fan motor and cycling options to manage operating cost.

Fluid coolers

Large face area and extra heat transfer surface, available with 1/2 inch or 5/8 inch copper tubes and a range of fan motor and cycling combinations.

Custom portfolio

For severe duty applications like mining, aerospace ground support, and telecommunications, or any project requiring corrosion protection or high-temperature operation beyond the standard line.

Finned coils

ARI certified heating and cooling coils

Copper tubes mechanically expanded into aluminum fins, with 1/2 inch and 5/8 inch tube options, sizes through 12 rows and 300-plus inches in length, and galvanized steel, copper, or stainless steel casing for the air-handler and replacement markets.

OEM finned tube heat exchangers

Custom coils for the original equipment market in 5/16, 3/8, 1/2, and 5/8 inch tubing, rated for virtually any tube-side fluid including volatile refrigerants and CO2, built to the same standards as Cancoil’s own equipment and UL/CSA listed.

Not sure which coil or unit fits your application?

Start from the decision, not the catalog.

Supermarket coil replacement guide

When to replace a failing display case coil and what to specify.

Read guide

Food processing coil sizing guide

Capacity matched to actual production-scale load, not a generic chart.

Read guide

Walk-in construction guide

Panels, doors, and refrigeration specified as one system for food processing facilities.

Read guide

Need refrigeration equipment or a replacement coil?

Tell us about the application and we’ll help you spec the right Cancoil unit or coil for the job.

Request a quote